TEMPERATURE CONTROL SENSORS

 

 

 

 

 

1.Thermocouple Probes

For use with Digital Temperature Indicator Model : PE 221P (K type)

Cr/Al probes with handle and two meter PVC cable.

1) General purpose immersion probe upto 600C. 4.5mm dia x 300mm long SS Sheathing. For immersion application (Liquids/Air)

2) High Temperature immersion probe upto 1100C. 6mm dia x 300mm long Inconnel Sheath.

3) Needle probe upto 600C. 1.5mm dia x 150mm long SS Sheathing. Fast response in air and liquids.

4) Prick probe upto 400C. 3mm dia x 50mm long SS Sheathing sharp edge-tip (Chiesel Shaped) for easy penetration into

5) Standard Leaf Probe 8mm dia x 200mm long SS Stem with 25mm leaf upto 400C

6) Leaf probe - high Temperature 8mm dia x 300mm long SS Stem with 25mm leaf upto 1000C

7) Gas probe upto 800C. 8mm dia x 300mm long SS stem with shielded cage protecting sensor for air, exhaust gases.

8) Bare tip probe upto 600C 4.5mm dia x 300mm long SS stem, Exposed junction for very fasts response in air/gases.

9) Bow Shaped T/C sensor upto 800C 12.5mm dia x 300mm long x Bow dia 150mm SS stem for curved surface temperature measurement.

10) Spring Loaded Surface Probe upto 400C 8mm dia x 300mm long SS stem.

11) Washer type probe upto 600C With ID 5mm dia.

Head type thermocouple sensor
For use with Digital Temperature Indicator Model : PE 221 (T/C Ktype)
General purpose Immersion.
6mm dia x 300mm long SS Sheathing upto 400C.
6mm dia x 300mm Inconnel Sheathing upto 1100C.
For continuous temperature monitoring of ovens/Furnaces.

Mineral Insulated (MI) Thermocouples.
Bendable, vibration proof, fast response time
Thermocouple sensors.
Sheath dia Available - 1/1.5/3/4.5/6/8/mm.

Bayonet Thermocouples
Fixed/ adjustable immersion length, straight type/ L type for plastic industry.

top

 
2.RTD Sensors

For use with Digital Temperature Indicator Model : PE 221P (RTD type)

Pt-100 RTD probes with handle and 2 meter 3 core PVC cable

1. General purpose immersion Probe upto 400C. 4.5mm dia x 300mm long SS Sheathing.

2. Quick Response Immersion Probe upto 400C. 3mm dia x 300mm long.

3. Needle Probe upto 200C. 2.5mm dia x 300mm long SS Sheathing.

4. Prick Probe upto 400C. 3mm dia x 50mm long SS Sheathing.

5. Gas Probe upto 400 C. 8mm dia x 300mm long SS Sheathing

HEAD Type RTD Sensors
For use with Digital Temperature Indicator

General purpose immersion
6mm dia x 300mm long SS Sheathing upto 600C.

ACCESSORIES FOR HEAD TYPE SENSOR
A. Male fitting below head.
B. Fixed male fitting.
C. Adjusting compression fitting.
D. Adjusting flange fitting.

GENERAL NOTES:
1. The indicating accuracies do not include the errors of Thermocouples /RTD.
2. Mechanical dimension and technical specification subject to change to incorporate the latest development and design.
3. Panel Mounting Instruments.

Overall Dimensions
A. 72mm (W) x 72mm (H) x 100mm (D)
B. 96mm (W) x 96mm (H) x 40mm / 110mm / 180(D) C. 192mm (W) x 96mm (H) x 150mm(D)


Panel Cutout
A.68mm (W) x 68mm(H)
B.92mm (W) x 92mm(H)
C.184mm (W) x 92mm(H)

                                                                                                  top