Premier's Timers are microcontroller based units that can be used as delayed on timer, delayed off timer, cyclic timer. These timers are programmable to suit any requirement.
Model : PE 7000
'START' signal from potential free NO/NC contact.
'STOP' signal from potential free NO/NC contact.
TECHNICAL SPECIFICATIONS
Ranges : 0-9999 milliseconds/seconds/min.
Display : 4 digit, 0.5" ht, red LED.
Resolution : 1 ms/0.1 sec/1sec/1 min.
Accuracy : 0.05% ± 1 count
Time base : Quartz crystal based oscillator.
Reset : Push to reset push-button.
Supply : 230 V AC ± 10% 50 Hz.
Dimensions : 72(H) x 72(W) x 65(D) mm
96(H) x 96(W) x 65(D) mm
Weight : 300 g.
OPTIONS : 1) Remote Reset facility.
2) 6 digit, Time interval Meter with 0.3" ht/5" Ht red LED
display with Mechanical Dimensions of 72mm x 72mm x 110mm or 96mm x 96mm x 150mm respectively.
Model : PE 7104
Available in 2, 3 and 4 digit miliseconds/seconds/minutes/ hour range.
On delay or Off delay.
Elapsed time/ Remaining time indication.
TECHNICAL SPECIFICATIONS
Ranges : 0-9999 milliseconds/ seconds/ min/ hour.
Display : 4 digit, 0.5" ht, LED display.
Resolution : 0.001/ 0.01/ 0.1/ 0.1 - Selectable and seconds/ min/ hour selectable.
Accuracy : 0.05% ± 1 count.
Time setting : 2/ 3/ 4 digit Thumb wheel switches.
Control Action : Delayed ON/ Delayed OFF.
Output : 2 relay
Start : Front Start/ Power On start/ PNP switch/ NPN switch/ Contact switch
Reset : Push to reset push-button/ External reset.
Supply : 230 V AC ± 10%, 50Hz
Dimensions (h*w*d, in mm) : 48 * 48 * 110
72 x 72 x 65
96 x 96 x 65
Weight : 500 g.
Model : PE 7272
TECHNICAL SPECIFICATIONS
Operating Modes: On delay/ Off Delay/ Cyclic On- Off/ Forward Reverse With Hold Time
Range :Programmable from 0.01 sec to 9999 hrs .
Display :2 rows of 4 digit, 0.5" ht, white LED and 4 digit, 0.39" ht, green LED
Resolution : Selectable (10 ms/ 1 second/ 0.1 min/ 1 minute/ 1 hr).
Setting : ON time, Off time setting, cycles adjustable by keypad.
Output : Two Relays
Timer Start : Power On Start
Manual Start
Remote Start
Output 1 : On Delay
Off Delay
Cyclic with On First, Cyclic with Off First
Output 2 : Auxiliary
Invert
Cycle End
Supply : 90- 270 V AC/ DC, 50 Hz.
Dimensions (h*w*d, in mm) : 72 x 72 x 65
96 x 96 x 65
48 * 48 * 110
Weight : 300 g.
Below is a video of our cyclic timer or - Click here
Other Relevant Products:
Counters- Click here
Data Loggers- Click here
Process Indicators-Click here